Gateway KX1563 Manuel du propriétaire

TABLE OF CONTENTSSpecial notes on LCD monitors...1Information for your safety and comfort...

EN-9PIN NO.DESCRIPTIONPIN NO.DESCRIPTION1.Red9.+5V2.Green10.Logic Ground3.Blue11.Monitor Ground4.Monitor Ground12.DDC-Serial Data5.DDC-return13.H-Sync

Standard Timing TableEN-10Mode Resolution1.  VGA 640x480 60Hz2.  SVGA 800x600 56Hz3.  SVGA 800x600 60Hz4.  XGA 1024x768 60Hz5.

INSTALLATIONTo install the monitor to your host system, please follow the steps as givenbelow:Steps1.1-1Connect Video Cablea. Make sure both the monit

USER CONTROLSPower Switch / Power LED:To turn the monitor ON or OFF.Lights up to indicate the power is turned ON.Using the Shortcut MenuPress the fun

MainMenuiconSubMenuiconSubMenuitemDescriptionN/AUser modeUser defined. Settings can be fine-tuned tosuit any situationN/AStandardmodeDefault Setting.

Adjusting the OSD settings--------------------------------------------------------------------Note: The following content is for general reference onl

Adjusting the OSD position1Press the MENU key to bring up the OSD.2Using the directional keys, select OSD from the on screen display.Then navigate t

Adjusting the setting1Press the MENU key to bring up the OSD.2Using the / keys, select Setting from the OSD. Then navigate tothe feature you wis

Product information1Press the MENU key to bring up the OSD.2Using the / keys, select Information from the OSD. Then thebasic information of LCD

EN-18(VGA Mode)TROUBLESHOOTINGBefore sending your LCD monitor for servicing, please check the trouble-shooting list below to see if you can self-diagn

EN-1SPECIAL NOTES ON LCD MONITORSThe following symptoms are normal with LCD monitor and do not indicate aproblem.NOTES· Due to the nature of the fluor

Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.co

EN-2Information for your safety and comfortSafety instructionsRead these instructions carefully. Keep this document for future reference. Follow allwa

EN-3Product servicingDo not attempt to service this product yourself, as opening or removing covers mayexpose you to dangerous voltage points or other

EN-4-----------------------------------------------------------------------------------------------------Warning! We do not recommend using the produc

EN-5· LCD MonitorUNPACKINGPlease check the following items are present when you unpack the box,and save the packing materials in case you will need to

EN-6Attaching / Removing the BaseSCREEN POSITION ADJUSTMENTIn oder to optimize the best viewing position, you can adjust the tilt ofthe monitor by usi

EN-7CONNECTING THE POWER CORD· Check first to make sure that the power cord you use is the correct typerequired for your area.· This monitor has a uni

EN-8Power savingThe monitor will be driven into Power Saving” mode by the control signalfrom the display controller, as indicated by the amber-color p