Gateway Notebook M350 Manuel d'utilisateur télécharger pdf (Page 37)

Replacing Gateway M350 Components

www.gateway.com

6 Remove the keyboard cover by following the instructions in “Replacing

the keyboard cover” on page 19.

7 Open the keyboard compartment by following the instructions in

“Replacing the keyboard” on page 23.

8 Gently press outward on the clip at each end of the memory module until

the module tilts upward.

9 Pull the memory module out of the slot.

10 Hold the new or replacement module at a 30-degree angle and press it into

the empty memory slot. This module is keyed so it can only be inserted

in one direction. If the module does not fit, make sure that the notch in

the module lines up with the tab in the memory bay.

Important You do not need to disconnect the keyboard from the

system board.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Pas de commentaire

Gateway Notebook M350 Manuel d'utilisateur Page 37