Gateway Server E-842R Manuel d'utilisateur télécharger pdf (Page 30)

CHAPTER 2: Getting Started

Enclosure cabling - multiple enclosures

You can connect additional expansion enclosures to an E-842R RAID enclosure. Multiple enclosures

are connected together using SAS patch cables, up to a maximum of five enclosures, including the

RAID enclosure. A typical two-expansion enclosure configuration is shown below. To fully populate

your installation to the maximum number of enclosures, follow the example below connecting the

enclosures in the same fashion for each additional expansion enclosure.

Drive slot arrangement

Each enclosure has 12 drives which are referenced by their locations as shown in the following

table. Drives are numbered column/row. For information on installing drive carrier modules, see

“Installing a drive carrier module” on page 27.

Column/row 1 2 3 4

1 Drive 1 Drive 2 Drive 3 Drive 4

2 Drive 5 Drive 6 Drive 7 Drive 8

3 Drive 9 Drive 10 Drive 11 Drive 12

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Pas de commentaire

Gateway Server E-842R Manuel d'utilisateur Page 30